惠普4431S笔记本怎么拆机清灰这个确实是有点简单的难以置信，有可能都不需要螺门丝刀。首先拿下电池，看下电池仓侧壁上的一个螺丝孔，上边有没有螺丝，有就用螺丝刀把它下下来，没有的话，继续下一步。惠普笔记本cq43拆机清理风扇步骤：注意事项：拆机之前去除人体静电。动手能力不强，可以去售后或者电脑城找专人进行拆机清灰操作。惠普笔记本6535S拆机清灰。清灰主要的步骤是拆键盘拆开关板拆冷却管就可以了这类视频惠普中国是不提供的要到美国惠普总部的网站才有视频这里是没办法贴的下面的是拆解视频附的文字的拆解步骤KeyboardremovalCaution!UsecaretopreventdamagingtheZIFconnectorandribboncable.
惠普4431S笔记本怎么拆机清灰
这个确实是有点简单的难以置信，有可能都不需要螺门丝刀。首先 拿下电池，看下电池仓侧壁上的一个螺丝孔，上边有没有螺丝（我新买的4431s就没有），有就用螺丝刀把它下下来，没有的话，继续下一步。
然后把卡住电池的两个扣往中间扳动，然后顺势把底盖往电池仓的反方向推动，后盖就下来了，可以看到内存，硬盘，和风扇，无线网卡等。
然后把卡住电池的两个扣往中间扳动，然后顺势把底盖往电池仓的反方向推动，后盖就下来了，可以看到内存，硬盘，和风扇，无线网卡等。
惠普CQ43笔记本怎么拆机清灰?
惠普笔记本cq43拆机清理风扇步骤：注意事项：拆机之前去除人体静电。动手能力不强，可以去售后或者电脑城找专人进行拆机清灰操作。
惠普笔记本6535S拆机清灰。
清灰 主要的步骤是拆键盘 拆开关板 拆冷却管 就可以了
这类视频惠普中国是不提供的 要到美国惠普总部的网站才有
视频这里是没办法贴的 下面的是拆解视频附的文字的拆解步骤
Keyboard removal
Caution! Observe all precautions when removing an白财完刑概杂看封d replacing components.
Before you begin: Remove the battery.
Remove the two 7 mm T8 Torx screws from the back corners of the notebook that s祖示田降青日价ecure the switch cover to the base enclosure.
Remove 洋企扩吧the two 3 mm T8 Torx screws inside the battery bay.
Remove the two 仍城感装资氧望任解7 mm T8 Torx screws marked with a keyboard icon on either 施斗厚策格side of the memory compartment that 呀学条做secure the keyboard to the base enclosure.
Turn the notebook right side up and open th践e display 额panel fully.
Pull 线动措居溶提抓实例危up on the outer edges of the switch cover to detach it from the b落听层爱财许要仍ase enclosure and move it away from the top edge of the keyboard. Do not remove the switch cover.
Lift t战杀践he top edge 己内奏站术真列of the keyboard 克胞and move it toward the back of the notebook to e兴属面纸如办意苏放xpose the keyboard ribbon cable and the ZIF connector on the system boa紧尽做曾念密区算解rd.
Using 赶极难片消法阳minimal force, flip the locking bar up on the ZIF connector and disconnect the keyboard ribbon cable from the system board.
Important! Use care to prevent damaging the ZIF connector and ribbon cable.
这类视频惠普中国是不提供的 要到美国惠普总部的网站才有
视频这里是没办法贴的 下面的是拆解视频附的文字的拆解步骤
Keyboard removal
Caution! Observe all precautions when removing an白财完刑概杂看封d replacing components.
Before you begin: Remove the battery.
Remove the two 7 mm T8 Torx screws from the back corners of the notebook that s祖示田降青日价ecure the switch cover to the base enclosure.
Remove 洋企扩吧the two 3 mm T8 Torx screws inside the battery bay.
Remove the two 仍城感装资氧望任解7 mm T8 Torx screws marked with a keyboard icon on either 施斗厚策格side of the memory compartment that 呀学条做secure the keyboard to the base enclosure.
Turn the notebook right side up and open th践e display 额panel fully.
Pull 线动措居溶提抓实例危up on the outer edges of the switch cover to detach it from the b落听层爱财许要仍ase enclosure and move it away from the top edge of the keyboard. Do not remove the switch cover.
Lift t战杀践he top edge 己内奏站术真列of the keyboard 克胞and move it toward the back of the notebook to e兴属面纸如办意苏放xpose the keyboard ribbon cable and the ZIF connector on the system boa紧尽做曾念密区算解rd.
Using 赶极难片消法阳minimal force, flip the locking bar up on the ZIF connector and disconnect the keyboard ribbon cable from the system board.
Important! Use care to prevent damaging the ZIF connector and ribbon cable.
